3000 readers a day
Mangiamaccheroni FXcuisine.com  

I Made My Own Macaronis From Scratch

 Home >> Recipes
Keywords ¦ ¦ ¦
Feedback10 comments - leave yours!
ZOOMLarger imagesPrint
Print
How do they make the hole in the maccheroni? I had thought about it long and hard only to conclude you just can't make tubular pasta at home. I was wrong - see how I made my first batch of macaronis!

Have you ever wondered how they make the hole in the macaroni, penne, rigatoni and other tubular pasta? There is much speculation as to how it's done. 'They must use long needles' say some, while other think that 'they first take the hole, then wrap it with pasta dough and let it dry'.

My new Kenwood Chef came with a domestic pasta extruder that promised to turn out 'fresh maccheroni rigati'. It worked! See for yourself how:

Start by beating a few eggs with a pinch of salt, then add twice their weight in semolina and mix. You need to reach a crumbly texture. If it makes a ball, add more flour and cut it back in crumbles. Too soft a dough will make your maccheroni cave in.

Assemble the contraption pictured above and attach it to the machine. It is quite simple really. A funnel feeds the dough to a worm drive that pushes it against a a bronze grid. The pasta is compressed and exits in one of four small chambers with a big pin in the middle. That's where the macaroni get their tubular shape. The dough exits on the other end as four little fluted tubes.

The dough begins its exit through the bronze extruder grate.

The macaronis are ready to be cut by moving the cutting lever you see above. You need to feed the crumbles manually and cut at desired length. Great fun!

This is my second batch, with four oversize macaronis I did to see just how long they could be! My first batch was not successful as I disregarded the instructions recommending crumbly dough. If you look carefully you will notice most macaroni have one open end and one closed end. The blade seems to seal shut one end and you need to work with a toothpick to reopen it if you think it's necessary. I will try an even drier dough and see if that still happens.

The pasta cooks for about 3.5 minutes. It is very much al dente and crunchy even though I made it only an hour before. This is very encouraging! The pasta has a delicious strong fresh eggs smell. Very much unlike any bought pasta! The Kenwood fresh pasta extruder comes with bronze discs, this is terrific as it gives the pasta a very grainy texture so the sauce sticks. Best quality pasta in Italy is always trafilato al bronzo - bronze-extruded.

I prepared it with an Italian recipe of crushed garlic fried in olive oil with chopped walnuts, fresh basil and lots of Parmesan. Another success at FXcuisine!


240070 views


Did you like this article? Leave me a comment or see my most popular articles.

Related Articles

My New Italian Chitarra Pasta Cutter **
Homemade pasta with the legendary Italian chitarra, a harp-shaped pasta cutting tool.


Bigoli, Bigolaro, Bigolarist **
My largest and most unusual pasta-making accessory, the bigolaro, made 28 fat spaghettis, called bigoli, each as long as the room. Served with the traditional duck ragł, this made my guests very happy despite the fact they had to make their own pasta.


Homemade Garganelli Pasta **
Thanks to a tiny a garganelli comb ordered from Italy I was able to make these legendary hand-rolled penne. A treat!


Priest-stranglers in Neapolitan Meat Sauce *
These gnocchis served in the cult Napolitan ragł sauce would be a world-famous dish if they didn't take 7 hours to cook.


Pasta con l'anatra - pasta in duck sauce *
Using a whole duck to make pasta sauce is uncommon outside Italy.


  Most Popular ¦ Most Recent ¦ By Subject ¦ Last Comments

Copyright FXcuisine 2024 - all rights reserved.
If you do this recipe at home please let me know how it worked for you by submitting a comment or send me a picture if you can. Thanks!



10 Comments

  • #1
  • Comment by mick
I enjoyed reading your article!60 yrs ago I used to watch an old Italian woman, she had a 2ft. piece of piano wire on which she rolled the dough and then pulled the wire out which left a hole in a 18 inch piece which she called macaron without the 'i'. She gave me some quite often, it was beautiful, I never told anybody as in those days after the war you were not permitted to mix with them as they were considered dirty wogs. I didn't think so then and I don't think so now. What strange things people teach their children!
  • #2
  • Comment by Chef Bubba
hey, nice recipe.  I would say that your pasta tube are closing on one end because you have the dough too soft (too much egg).  Extrusion pressure will make a very dry dough into a great finished product (assuming the machine used has enough force).  As well it seems that not all the semoline in your mixer was hydrated enough by the liguid.  I would mix longer or wrap and store pasta before extruding to make sure all the grain is fully hydrated.  Love your site!!!  Got about 5 recipes on here I cant wait to try!!  
Hello!  I loved your article and photos!  I am looking for a domestic pasta extruder (similar to the one you describe above which you used for your home made macaroni), but have been unsuccessful in locating one.  The Kenwood Chef site did not display this item.  Do you know where I might find one for home use?  Thank you!
  • #4
  • Answered by fx
Sheri, if you visit the UK Kenwood site they have it, otherwise you can buy the pasta extruder kit on Ebay.
  • #5
  • Comment by Stacey Damico
I adore your website and your passion and thoroughness. I just returned from Italy where I attended a week long cooking class near Lucca (Near Pisa). It was amazing and now I am addicted to finding the most authentic recipes, auhentic ingredients..like Asperso, and authentic tools..like a Garganelli comb. I tried emailing that Milan store but I have a feeling I am going to have to go in person the next time I'm over there. I'd love to find something called a ciuliri..it is a a kind of sieve with the bottom made of thin twisted rushes used to texture and shape a type of Sardignian pasta called malloreddus. Have you ever heard of this?
Do you think the Milan store will ship to the US.?
I'm anxious to finish reading the rest of your site but I don't want to lose my job. I've spent so much time and I can't wait to get back to it.Keep up the good work!
Stacey
  • #6
  • Answered by fx
Stacey, thanks for visiting! How was this cookery course near Lucca? Would you recommend it? I did not know abou the ciuliri and now want one - but please check my Asparagus Malloredus article to see some bought malloredus. The Milan store will not answer any query unless you call in Italian and arrange shipping yourself. And please keep your job, my articles will be there tomorrow!
  • #7
  • Comment by Fiona
I just made my first pasta tonight.  I bought an excellent 2nd hand but never been used Kenwood Chef A901.  I also have the A701 which is older but still working well.  A few months ago I bought the pasta extruder but found it didn't fit the A701.  I got the A901 at the weekend and decided to try out the pasta extruder tonight - with no real recipe to follow and I've never made pasta before.  I used plain flour, 2 eggs and 1/4 teaspoon salt and added a little water (mistake!)  I made the mixture a little too wet and it all stuck together.  Added some more flour to dry it up and started to get what looked like tagliatelli.  Anyway, it tasted not too bad but I wish I'd seen this site first before I tried it.  I will be making pasta again soon and will try your method.  Many thanks.
  • #8
  • Answered by fx
Fiona, you should use durum wheat semolina, that is flour from a special wheat that has a harder grain, you can find it sometimes in ethnic aisles in supermarkets or just where they stock the flours. Add a little olive oil, no salt and no water, and make your dough as dry as you can, it should be downright crumbly, not really a dough, otherwise your pasta will stick together and you'll lose your spirits! Good luck!
I love making food from scratch.  I've always wondered how to make pasta. Thanks for informing me. What an easy way. I can do that.
Thanks
  • #10
  • Comment by Joe
Very nice bronze plates! The Kenwood website seems to show plastic plates on the pasta machine though. Did you get those plates separately?

 Tell me what you think!

Write a comment below to let me know what you think about my article or ask any question you may have.

 (required)

 E-Mail (required, will not be displayed)

 (optional)



Please follow me on Instagram for lots of new content every week!
Francois

Subscribe and you'll never miss an article:
or RSS.







Sponsored links: DHTML Menu By Milonic JavaScript